Oil filter length.

Bluerider3

Guest
Received a friendly warning to make sure to not buy an oil filter longer than the stock NT700V oil filter. Reason being that when you roll off the center stand and it folds up, it can punch a hole in the longer filter. My question is how long/tall is the stock oil filter for this bike?
 
Joined
Jun 14, 2012
Messages
1,426
Location
Richardson, TX
Bike
2010 Red NT700
There should be a thread here with dimensions but if you google the dimensions of an M1-108 by Mobil1, those dimensions work
Fram equivalent also fits
 

Warren

2
Joined
Dec 13, 2010
Messages
2,332
Location
O'Fallon, MO
Bike
2019 Yamaha XMAX
OEM 15410-MFJ-D01 64 mm or 2.5". Some of the aftermatket ones that look like they would work are 2.75" and they will puncture.
 
Last edited:
Joined
Mar 3, 2013
Messages
47
Location
Moses Lake, WA
Bike
2010 Silver NT700V
The oil filter for the NT700V is not any smaller than any other Honda filter. In fact Honda uses the same filter on all their motorcycles. The issue with the NT is clearance.
 

mikesim

Site Supporter
Joined
Jun 7, 2011
Messages
3,331
Age
74
Location
Union, MO
Bike
NT700, Red, #989,
You can use a WIX WL10000. It was specifically designed for Honda motorcycles.

Mike
 

Tonydtiger1971

Guest
Wouldn't this one puncture? Be careful of the FRAM you buy. one is 1/4" longer and it will puncture.
 
Joined
Jul 30, 2016
Messages
13
Age
76
Location
Rock Hill SC
Bike
2010 silver NT700v
Fram PH6017a which is used on a ton of Hondas and others...xrefs to HONDA '15410-MFJ-D01'...but the 'Fram PH6017a' specs are
Gasket I.D. 2.21"
Gasket O.D. 2.48"
Gasket Thickness .21"
Gasket Usage Base
Product Height 2.87" --- TOO LONG
 

Tonydtiger1971

Guest
Fram PH6017a which is used on a ton of Hondas and others...xrefs to HONDA '15410-MFJ-D01'...but the 'Fram PH6017a' specs are
Gasket I.D. 2.21"
Gasket O.D. 2.48"
Gasket Thickness .21"
Gasket Usage Base
Product Height 2.87" --- TOO LONG
Yep, that one.
 
Top Bottom