Electrical harness connector is burnt. Battery runs dead on every ride.

OP
OP
Joined
Mar 14, 2015
Messages
24
Location
Baltimore, Maryland, USA
Bike
Silver 2010 NT700VAA
What was the voltage reading at the battery after your fix? That should tell you if the charging system is OK. Ooooooo.... I see Scotch Locks on your wiring.... naughty... naughty ;^)


Mike
My battery Voltage is 13.6 Volts with no load. The Scotch connected wires have not been used in five years. I had used them to tap into my tail lights for the top box that I used to have. Now, the wires are capped and terminated. My current top box has no lights.
 
OP
OP
Joined
Mar 14, 2015
Messages
24
Location
Baltimore, Maryland, USA
Bike
Silver 2010 NT700VAA
Those Scotch connectors have been there for more than six years. They have not carried current for about five years. I ordered a new tail light because my current tail light was damaged by a vandal. I intend to remove them when I replace my tail light.
 
Top Bottom