Results 1 to 7 of 7

Thread: Delkevic exhaust 17" for nt700v anyone using?

  1. #1

    Join Date
    Mar 2016
    Location
    Mandeville, louisiana
    Posts
    12
    My Gallery

    Delkevic exhaust 17" for nt700v anyone using?

    Anyone using the delkevic 17" exhaust ?

  2. #2
    jaebird's Avatar
    Join Date
    Apr 2017
    Location
    Greenville, TX
    Posts
    14
    My Gallery

    Re: Delkevic exhaust 17" for nt700v anyone using?

    I have the HONDA NT700V DEAUVILLE 06-15 17" TRI-OVAL exhaust on my bike. I got it for 2 reasons. 1. It is two piece so now removing rear wheel is a breeze, and 2. No cat, so lighter and much less residual heat into the plastic saddle bag. As a side benefit, the bike sounds better!
    Last edited by jaebird; 10-11-2017 at 06:35 PM.

  3. #3
    Moderator Phil Tarman's Avatar
    Join Date
    Dec 2010
    Location
    Greeley, CO
    Posts
    12,316
    My Gallery

    Re: Delkevic exhaust 17" for nt700v anyone using?

    Good reasons! It's a good-looking exhaust.
    Phil Tarman
    Greeley, CO
    NT700VA 2010 SN #0079 -- "Dudley" -- 125,000+ Miles
    IBA # 5811: SS1000(X3), BB1500, BBG
    2013 Four Corners Tour Finisher # 70
    Read about the "Epic Ride" at: www.ptarman1.com


  4. #4
    mikesim's Avatar
    Join Date
    Jun 2011
    Location
    Union, MO
    Posts
    1,336
    My Gallery

    Re: Delkevic exhaust 17" for nt700v anyone using?

    Quote Originally Posted by jaebird View Post
    I have the HONDA NT700V DEAUVILLE 06-15 17" TRI-OVAL exhaust on my bike. I got it for 2 reasons. 1. It is two piece so now removing rear wheel is a breeze, and 2. No cat, so lighter and much less residual heat into the plastic saddle bag. As a side benefit, the bike sounds better!
    Are you still using the O2 sensor?

    Mike
    "tis better to remain silent and be thought a fool than to open your mouth and remove all doubt...." Mark Twain

  5. #5
    jaebird's Avatar
    Join Date
    Apr 2017
    Location
    Greenville, TX
    Posts
    14
    My Gallery

    Re: Delkevic exhaust 17" for nt700v anyone using?

    Quote Originally Posted by mikesim View Post
    Are you still using the O2 sensor?

    Mike

    Yes, O2 sensor threaded port and center stand stop are part of the mid pipe.

  6. #6
    (Threadstarter)

    Join Date
    Mar 2016
    Location
    Mandeville, louisiana
    Posts
    12
    My Gallery

    Re: Delkevic exhaust 17" for nt700v anyone using?

    Thanks for your responses. I received my delkevic 17" tri oval exhaust yesterday and installed it today. It's less than half the weight of the stock unit and looks and sounds good. Not loud but distinctive. Seems to Rev quicker also. Can't beat the price either $219.95 for everything including shipping. Really like so far.

  7. #7
    Brillot2000's Avatar
    Join Date
    Nov 2017
    Location
    Sun Valley, CA
    Posts
    86
    My Gallery

    Re: Delkevic exhaust 17" for nt700v anyone using?

    I am considering this exhaust system as well. I cannot seem to find any decent pictures showing it is installed and how it looks on the bike.



    Also, I would like to know if that any of you that have this unit installed seen any improvements in performance or MPG?

    I have read these posts and many others that mention of the stock exhaust is a pain to deal with when replacing the rear tire. I saw a video of this procedure and find it to be appalling.

    Any detailed images showing this exhaust system would be greatly appreciated and will help me with making this decision to go this route.

    Thank you in advance.
    Bruce B.
    Sun Valley, CA
    2010 NT700V - NaTalie, 2013 NC700X - NaNCy, & 1987 XL600R - Megas

+ New Posts

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •