be better seen

Luca_69

Guest
The smaller box is a transmitter for turn signals and brake lights on the top case. The larger box to the bottom electronics stalling X times flashes brake light to illuminate (you can adjust the frequency and number of flashes.) Obviously done so that it could insert or disconnect from the original wiring without damaging or modifications.
 

Attachments

Joined
Oct 29, 2011
Messages
1,230
Location
oregon
Bike
2011 NT, 01 Ultra, 04 VLX
Luca,

Who is the manufacture of this system?

I had a small box that was supposed to be a turnsignal cancling unit for NT. It never proved to be satisfactory. It would be good for a short time , then would fail. I finley gave upon it.

Eldon
 
Joined
Oct 21, 2013
Messages
58
Location
Dallas, TX
Bike
NT700va
Has anyone tried using a Pacific Coast turn-canceling relay in a NT700? One could even jumper or use splices to that relay. I have the after market unit and it is not as handy as the PC800 one.
 
Joined
Oct 29, 2011
Messages
1,230
Location
oregon
Bike
2011 NT, 01 Ultra, 04 VLX
That PC idea may be a good one, I will have to get my tech buddy to look into that, among others, Thanks for the idea.

Eldon
 
Joined
Dec 14, 2010
Messages
2,007
Location
Tijeras, NM
Bike
1984 Moto Guzzi T5
If that relay works let us all know. I was about to make up a turn signal cancelling circuit for the goose.
 
Top Bottom