Off by one silly mm. 27mmWhat is the size of the rear axle nut. I measured and bought a 28 mm box end wrench, but it is slightly too large.
Thanks-John
Close, but no cigar. Damn metrics.Off by one silly mm. 27mm
Thanks for the tip.Put one layer of Tshirt rag over the nut and use/push that 28mm wrench over it and you'll be good:wink:
27mm is the same as 1 1/16" :redface:
Yep used a 1 1/16, 3/4 inch drive to break it loose and used a 27 mm 1/2 inch drive to torque it to 66 ft- lbs during the re-installation.I think Chuck used a 1 1/16" socket on my rear axle yesterday. Might be wrong.