SOLD Right Side Large Red Lid $50 OBO.

Manfred

Stuart Brogden
Joined
Sep 6, 2024
Messages
387
Location
La Vernia, TX
Bike
2010 Honda nt700v
In very good shape - no cracks. A few small holes where after-market latches were installed. One of the latch attach points is damaged.
 

Attachments

  • 20260205_093126.jpg
    20260205_093126.jpg
    131.3 KB · Views: 8
  • 20260205_093136.jpg
    20260205_093136.jpg
    124.5 KB · Views: 6
  • 20260205_093139.jpg
    20260205_093139.jpg
    70.1 KB · Views: 7
  • 20260205_093143.jpg
    20260205_093143.jpg
    91.5 KB · Views: 9
Last edited:
If nobody wants this lid, it will go in the trash end of this month.
 
I am new to the world of NV700T bikes. Will this Large(r) right side lid fit the stock bag? I know/think, these larger side covers may have come on bikes in Europe I believe.
Also, due to the main latch point being damaged am I correct to think there would then be no way to ensure that lid closes when put on the bike? And if so, can it be fixed to allow the latch/pin to be glued back on in some manner (not a clue how one could do that).

Am looking at a used bike just today though not a clue of bike history that would need a right side lid. Honestly would not care if right side lid is wider then left side.
The bike seller tried to slam the right side bag lid closed and ended up breaking a rather large top section of the bag then later a crack went straight down the bag and separated into two pieces and the latch area broke apart totally though the latch/pin is presently with a small section of plastic though no longer attached to any other plastic.

Based on your reply and input let me know if you can send it to zip 33770 for $50 total, including shipping.
Apology for the questions…just don’t know about NV700T bikes…own a nc700x and some other bikes.
Thank you in advance for any inisights.
 
I am new to the world of NV700T bikes. Will this Large(r) right side lid fit the stock bag? I know/think, these larger side covers may have come on bikes in Europe I believe.
Also, due to the main latch point being damaged am I correct to think there would then be no way to ensure that lid closes when put on the bike? And if so, can it be fixed to allow the latch/pin to be glued back on in some manner (not a clue how one could do that).

Am looking at a used bike just today though not a clue of bike history that would need a right side lid. Honestly would not care if right side lid is wider then left side.
The bike seller tried to slam the right side bag lid closed and ended up breaking a rather large top section of the bag then later a crack went straight down the bag and separated into two pieces and the latch area broke apart totally though the latch/pin is presently with a small section of plastic though no longer attached to any other plastic.

Based on your reply and input let me know if you can send it to zip 33770 for $50 total, including shipping.
Apology for the questions…just don’t know about NV700T bikes…own a nc700x and some other bikes.
Thank you in advance for any inisights.

The large lids are designed to fit against the inner pannier plastics with no trouble. That damaged latch point CAN be repaired to work with the stock latches if you are very careful about lining it up in 3 dimensions. Riders must very careful in how they close these lids - that and keeping the cables and metals parts free to move.

The big box required to ship this in causes shipping to be expensive - logistics companies use dimensional weight. I've calculated sipping for this box to another zip code and it was around $54.
 
If you did not toss the lid in the trash yet could you donate it to me and I just pay the shipping to 33770?
I need to do a quick post on the forum about that used bike's headlight not working...don't know if I will go down a rabbit hole getting it sorted out or not nor cost to get that fixed.
thank you
 
If you did not toss the lid in the trash yet could you donate it to me and I just pay the shipping to 33770?
I need to do a quick post on the forum about that used bike's headlight not working...don't know if I will go down a rabbit hole getting it sorted out or not nor cost to get that fixed.
thank you
Send your address to me via PM and I'll ship it to you. I'll get the shipping cost figured when I get your address.
 
Ok, I will need to confirm the bike is still for sale today, thinking it is.
Plus once you confirm shipping cost I will be able to know what cost that would be. If not too high would do it though you can advise. Will message you address
 
Ok, I will need to confirm the bike is still for sale today, thinking it is.
Plus once you confirm shipping cost I will be able to know what cost that would be. If not too high would do it though you can advise. Will message you address
Shipping will around $50. They go by the size of the box, not the weight.
 
Back
Top Bottom