Catalytic converter

honestdoc

Guest
Has anyone tried removing their catalytic converter? I have a 2011 NT700. I believe it is located in the pipe just forward of the muffler.
 
Honestdoc, welcome to the Forum. Why don't you introduce yourself to us? Tell us something about your riding history, where you live, how long you've had your NT, etc.

As far as your question about removing the catalytic converter, I don't remember anyone ever mentioning that. My question would be simple: "Why?" I think if you did, you'd probably need to find some way to adjust the mixture to balance the change in the exhaust pressure (or something like that).
 
Yes, the converter is the bulge in the exhaust pipe ahead of the muffler. On a engine as small as the NT, the back pressure of a converter is negligible. The ECM calibration still takes this into account. You may run into driveability problems if you remove the converter, keep in mind everything is designed to work as a system. Personally, I like clean air, and would not remove emissions equipment on any modern car, truck, motorcycle. Just my 2 cents.

Brad
 
Why do you want to remove it? If you think some performance is lost in the CAT you'd probably be disappointed after removal because it'll probably run worse than when it was standard.
 
If you're chasing performance, you got the wrong bike for that. :LOL: The biggest gain would be to shed 160 pounds by selling the NT700 and get a 650 Hawk instead.
 
NewTo700V said:
If you're chasing performance, you got the wrong bike for that. :LOL: The biggest gain would be to shed 160 pounds by selling the NT700 and get a 650 Hawk instead.
Click to expand...
You got the weight savings right going with the 650 Hawk GT but The NT700 puts out 15 or more HP, So lets put The NT 700 into the 650 Hawk GT Bike!
 
DarylCincy said:
You got the weight savings right going with the 650 Hawk GT but The NT700 puts out 15 or more HP, So lets put The NT 700 into the 650 Hawk GT Bike!
Click to expand...
I have a 1988 Hawk which I have had since new. The Hawk has a motor with a really flat torque curve....much like a cruiser. It is way underpowered for the fame it is in. The 700 is slower off the line but much more lively up top. The 700 motor would be a big improvement in the Hawk.
 
Phil Tarman said:
Honestdoc, welcome to the Forum. Why don't you introduce yourself to us? Tell us something about your riding history, where you live, how long you've had your NT, etc.

As far as your question about removing the catalytic converter, I don't remember anyone ever mentioning that. My question would be simple: "Why?" I think if you did, you'd probably need to find some way to adjust the mixture to balance the change in the exhaust pressure (or something like that).
Click to expand...
Guess I should introduce myself. I'm a retired dentist and under normal circumstances, my wife and I spend November thru May at our home in Jupiter, FL. and June thru October at our home on Oneida Lake in upstate New York. Currently own 3 motorcycles-Honda NT700(2) and a Yamaha FJR1300. Keep one of the NTs(2011) in Florida and the other bikes in NY. Have been riding for over 25 years including across the US twice.
The reason I asked about the catalytic converter removal is because the previous owner of the FJR removed both cats. Bike sounds great and runs very well with no remapping. Just wondered if anyone has done it on an NT700. Looks like it will require cutting a window in the pipe, busting out the cat and rewelding the hole.
 
Well, so, it won't be terribly simple. But I still wonder, WHY?
 
Phil Tarman said:
Well, so, it won't be terribly simple. But I still wonder, WHY?
Click to expand...

I'm guessing so that it sounds sexier. The NT has, to many ears a rather bland exhaust note. I like the sound just fine, but to some folks it doesn't sound like a motorcycle. To each his own.

Mike
 
Like you Mike, I don't think a motorcycle needs to make a distinctive exhaust note. On a long trip, any additional noise can be tiring so I much prefer a quiet motorcycle. :cool:
 
I agree that on longer rides a quiet exhaust is far better.
I have ridden in groups and have at times had to drop back from the bike in front of me as the booming exhaust was unbearable.

Macka
 
mikesim said:
I'm guessing so that it sounds sexier. The NT has, to many ears a rather bland exhaust note.
Click to expand...

I didn't buy the NT for an exhaust note. Besides, adding a menacing growl to a sun-bleached prone tupperware container on wheels named after a French seaside resort just screams identity crisis. Much like HOG riders dressing up like outlaws while sporting thin blue line flag stickers.
 
DirtFlier said:
Like you Mike, I don't think a motorcycle needs to make a distinctive exhaust note. On a long trip, any additional noise can be tiring so I much prefer a quiet motorcycle. :cool:
Click to expand...
I think that those of us who routinely ride long distances are in general agreement that quiet is good.

Mike
 
Welcome to the forums, Doc!

I have a burning suspicion that NT without cat is going to sound like a louder, slightly angrier sewing machine. :ROFLMAO:

But personally, I'd pay money to make my bike quieter, not louder! Most of the noise if from a top end anyway.
 
mikesim said:
I think that those of us who routinely ride long distances are in general agreement that quiet is good.

Mike
Click to expand...


That isn't possible on my other bike. The cam gear train is so loud, that at highway speeds the sound of the aftermarket can fades away and you just hear gear whine.
 
I have forgotten what your other bike is NewTo700V, if I ever knew, but that noise would not suit me at all.
That is one of the things (quietness) that I really like about the NT.
At our legal highway speeds it is quiet, smooth, comfortable and economical.
What better way to travel?

Macka
 
You must log in or register to reply here.
Back
Top Bottom