I am planning to do some maintenance on my NT and need advice and tips. Amazon is for just ease of listing. Current mileage 19k miles.
Please let me know if I am missing anything.
1) Oil Change
HONDA 08C35-A141L01 Honda Pro GN4 Motor Oil, 10W40, 1 gal Honda https://www.amazon.com/dp/B01J8DMQ92/ref=cm_sw_r_tw_dp_3X05CRDDEMXMZRB5NYKE?_encoding=UTF8&psc=1 via @amazon
Honda OEM Oil Filter HONDA Honda https://www.amazon.com/dp/B003O784DQ/ref=cm_sw_r_tw_dp_0BHCPNX8Z0CG5AHRPGXM?_encoding=UTF8&psc=1 via @amazon
Plus : rubber washer for the oil fill cap
2) Final Drive Oil
Honda 08208-0080 Pro Shaft Drive Oil Honda https://www.amazon.com/dp/B01L7ATCVO/ref=cm_sw_r_tw_dp_665HRTNNTCRCA8CN6SER?_encoding=UTF8&psc=1 via @amazon
Plus: Crush Washers
3) Coolant Flush?
Need suggestion on coolant
4) Brake Flush: Will go to dealer
I plan to get the extender I got installed, and want them to do a proper flush and bleeding after installing the thingabobber.
5) Brakes Pads look ok for now. Do you think it makes sense to ask them to replace them during break flush?
6) Spark Plugs, I am not seeing any riding or fuel efficiency issues, will try to check them. If its too difficult , will get it done during break flush.
7) Air filter : will change, K&N on the way.
8) Bulbs: 1 tail light bulb has gone partially kaput. I remember seeing a LED substitute, will search and get that.
9) Add Front fender spot lights ...
10) try and add a dashboard GPS mount
11) Install the pivoting riser to get the bars a little bit back towards me.
Please let me know if I am missing anything.
1) Oil Change
HONDA 08C35-A141L01 Honda Pro GN4 Motor Oil, 10W40, 1 gal Honda https://www.amazon.com/dp/B01J8DMQ92/ref=cm_sw_r_tw_dp_3X05CRDDEMXMZRB5NYKE?_encoding=UTF8&psc=1 via @amazon
Honda OEM Oil Filter HONDA Honda https://www.amazon.com/dp/B003O784DQ/ref=cm_sw_r_tw_dp_0BHCPNX8Z0CG5AHRPGXM?_encoding=UTF8&psc=1 via @amazon
Plus : rubber washer for the oil fill cap
2) Final Drive Oil
Honda 08208-0080 Pro Shaft Drive Oil Honda https://www.amazon.com/dp/B01L7ATCVO/ref=cm_sw_r_tw_dp_665HRTNNTCRCA8CN6SER?_encoding=UTF8&psc=1 via @amazon
Plus: Crush Washers
3) Coolant Flush?
Need suggestion on coolant
4) Brake Flush: Will go to dealer
I plan to get the extender I got installed, and want them to do a proper flush and bleeding after installing the thingabobber.
5) Brakes Pads look ok for now. Do you think it makes sense to ask them to replace them during break flush?
6) Spark Plugs, I am not seeing any riding or fuel efficiency issues, will try to check them. If its too difficult , will get it done during break flush.
7) Air filter : will change, K&N on the way.
8) Bulbs: 1 tail light bulb has gone partially kaput. I remember seeing a LED substitute, will search and get that.
9) Add Front fender spot lights ...
10) try and add a dashboard GPS mount
11) Install the pivoting riser to get the bars a little bit back towards me.