j-sharpe
Guest
Anyone installed an after market Cee Bailey shield? After taking a closer look at mine it seems the bolts have a tap weld . Any comments or input welcome .
OP
OP
j-sharpe
Guest
A small tap of the welding rod to fuse the bolt to the threading.
OP
OP
j-sharpe
Guest
Mines gonna take more then a wrench hehe just wondering if there were any tricks other then grinding the old bolts off. Or should I just take it to a bike shop...
Several of us have installed a Cee Bailey's windshield. Don't recall anyone having any problems with the installation. 5 minutes and you're done.
Last edited:
Are you looking at the allen head screw under the plastic cover? There isn't anything to tap weld it to.
The fixed nuts on the underside of the brackets are welded in place.
The fixed nuts on the underside of the brackets are welded in place.
When I installed mine I saw that. Turns out you do not cut off the tap weld, in fact, if I remember right, you pry off the front black plastic covers on the front face of the windshield and unscrew there. I think there is a how-to post on this site somewhere.
Found it, see http://www.nt-owners.org/forums/showthread.php?3810-How-do-I-take-off-the-original-windshield
It's in the Accessories -> Windshield section.
Found it, see http://www.nt-owners.org/forums/showthread.php?3810-How-do-I-take-off-the-original-windshield
It's in the Accessories -> Windshield section.
Last edited:
banjoboy
0
Yes, pry off the plastic on the front of the shield and then a very easy exchange.
Terry
Terry
Removal of the covers is not a "pry off" that requires metal tools. You merely use your fingers to stretch the rubber cover so its attachment lip is free of the plastic bracket, then it comes free.
OP
OP
j-sharpe
Guest
Awesome thanks all 