I am trying to take this piece out to see what I can put in there for speakers. Other wise I may get a good bluetooth speaker in a tankbag and go from there. I thought of going to a Sena 20s but I don't want constant radio noise in my helmet.
Dash cowl removal
- Thread starter EODEAN
- Start date
Don't bother, the only speakers that will fit are cheap 3 watt junk. Unless your willing to do some serious cutting / mods on dash insert and fairing. If you come up with something PLEASE post photos.
JQL
Growing old disgracefully
To get the Dash cowl off do the following:
Note: it's probably better to use a Bluetooth sound system to your helmet(s)
I've also removed the fairing in this shot
- Remove both the fairing pockets
- Remove both the middle cowl lids
- Remove both the middle cowl pockets
Now you have access to the Dash cowl
- Remove the 2 screws then gently pull the dash cowl away. It is held on by various tabs across the top and needs positive gentle force to unlock these.
Note: it's probably better to use a Bluetooth sound system to your helmet(s)
I've also removed the fairing in this shot
JQL
Growing old disgracefully
I thought the same until I got one. You tune it out when concentrating on the road.
This video shows the dash surround around the four minute mark. It might be helpful to you.
[video=youtube_share;0AAXXDlIHr0]http://youtu.be/0AAXXDlIHr0[/video]
[video=youtube_share;0AAXXDlIHr0]http://youtu.be/0AAXXDlIHr0[/video]