Manfred Stuart Brogden Joined Sep 6, 2024 Messages 439 Location La Vernia, TX Bike 2010 Honda nt700v Yesterday at 12:50 PM #1 How does one remove the brake pad retaining pin on the rear caliper? Don't see any hex key opening in either end. Cannot fit a 5mm or 6mm socket into the left side (which was mentioned on line).
How does one remove the brake pad retaining pin on the rear caliper? Don't see any hex key opening in either end. Cannot fit a 5mm or 6mm socket into the left side (which was mentioned on line).
OP OP Manfred Stuart Brogden Joined Sep 6, 2024 Messages 439 Location La Vernia, TX Bike 2010 Honda nt700v Yesterday at 1:14 PM #2 Got it figured out. Pin comes out on the RIGHT side.
