I recently posted about reading codes on my bike and the result was a code 19. I am set to order and replace my Pulse Generator and will be looking for a few pointers. I do not have a Service Manual... but it appears to be fairly straightforward. Anyone who has done this have any tips?
Looks like I remove the muffler in order to pull off the side engine cover - then remove the old sensor and replace with the new. Clean the cover, put on a light bead of sealer and reinstall everything in reverse order.
Any "gotchas" that I need to be aware of before tackling this?
Looks like I remove the muffler in order to pull off the side engine cover - then remove the old sensor and replace with the new. Clean the cover, put on a light bead of sealer and reinstall everything in reverse order.
Any "gotchas" that I need to be aware of before tackling this?