Foot Rest

gowman

0
Joined
Jul 31, 2012
Messages
17
Location
Northern Virginia
I just purchased a 2010 NT and instantly noticed that there is no foot rest. I had a 97 Night Hawk that had them and it was nice to have something that would support my heel while riding. Is there anything for the NT that can attach to the pegs that can support the entire foot or just the heel? Thanks!!
 
BigBill said:
This is something I would be interested in for my big clod-hoppers.
Click to expand...

I suggest you get a copy of the J&P and Drag Specialties catalogs. There are tons of aftermarket foot board options that could be adopted to fit the NT mount points.
 
I ride a lot with the toes of my feet on the pegs and the heels on the passenger pegs. I don't like my feet forward so don't use highway pegs.
 
RedLdr1 said:
I suggest you get a copy of the J&P and Drag Specialties catalogs. There are tons of aftermarket foot board options that could be adopted to fit the NT mount points.
Click to expand...

I looked there and Ebay, plenty of options that appear as if they might work but nothing specifically listed for the NT...do any other Honda models share the same type of pegs and mounts, at least similar enough to be interchangeable?
 
[I had a 97 Night Hawk that had them and it was nice to have something that would support my heel while riding]
That was an add-on and not something from the factory, either as original equipment or as a Honda accessory.
 
I saw a YouTube (sorry no link) video a couple of weeks ago were a guy had bolted a steel tube that was capped at the end. He drilled a hole between the rider and passenger pegs and used a bolt on the backside to thread the tube on. It actually looked really clean and a part of the bike. I'm sure with the right drill bit and parts it would be very simple and cheap to do.
 
I'm going to call Kuryakyn directly and see if they know for sure if they will fit the NT, or not.
Inspecting the photos side-by-side they look as if they could be a direct drop-in replacement for the pegs on our NTs.

I may need to pull one off my NT and measure it with a micrometer for them.
 
"" said:
Kuryakyn has lots of choices for riders as far as footpegs, types and extensions, highway pegs, floorboards, lowered pegs, etc etc. They may or may not have stuff for the NT specifically, but lots of stuff will interchange:

http://www.google.com/url?sa=t&rct=...=mNsq8gfJ98hJTCxCNNhihg&bvm=bv.43287494,d.b2I

Sam:)
Click to expand...

Kuryakyn support was of no help. :(

I see you have both an NT and a GL1800...could you possibly take a measurement of their peg mounts to see if they are as similar as I think?

Just a simple inner and outer dimension and depth of the clevis on the bikes, no need to take anything apart.
If they are within a millimeter or two, I can make them work. :)
 
I'm happy to report there is no need for measurements...I just received them and they are a perfect drop-in replacement for the NT!

So, what that means is that the NT and the GL1800 share virtually identical clevis mounts, at least for the front pegs.

Will post pics in a few. :D
 
Last edited:
The boards have three different positions in which they can be mounted, depending on the bike and rider, I have them moved all the way back for my big feet.

These are solid, heavy duty parts...nothing cheap about them at all!

Here are some pics...

attachment.php


As you can see they are a direct replacement for the NT, as well as the GL1800 which they were designed for.

attachment.php


This shows there is a slight issue with side stand clearance when its up, but nothing that can't be remedied with a few minutes in the welding shop. It will take longer to remove the stand than to cut the kick tab off and weld it back on a bit lower

attachment.php


FYI, if anyone decides to go this route and modify their side stand, be sure NOT to weld it while attached to the bike as it may risk damaging the electronics/computer.

:spsmile:
 
Last edited:
Bill
Do you have a picture of the whole bike with them on? Are they lower or wider than the original peg? How do they ride?

thanks
fltsfshr
 
fltsfshr said:
Bill
Do you have a picture of the whole bike with them on? Are they lower or wider than the original peg? How do they ride?

thanks
fltsfshr
Click to expand...

They have a 3/4 inch drop and possibly 1/2 inch wider but I would have to confirm the latter.

I can take another pic of the whole bike.
 
You could just cut off forward attachment point of the loop part of the sidestand.

Then bend and shape to suit. No need to weld anything as you shouldn't be putting any weight on it anyway.
 
I think they look good on the NT, not out of place really for a touring bike...

attachment.php


attachment.php


The width is virtually the same as the factory foot pegs so they are easy to adapt to...

attachment.php


attachment.php


:D
 
You must log in or register to reply here.
Back
Top Bottom