Coyote Chris
Site Supporter
I have updated my tool list with pics....I would appreciate any suggestions of things I left out....Thanks!
NT tool locator.doc 8/13
Under the seat.
Plug and Go Kit, Volt meter, Metric Hex key set, Small Channel Locks, Wrench Set including 17,14,12,10,and 8 mm open/closed end wrenches
?Pass through? shaving kit
?? and 3/8? breaker bars, Stubby ?-3/8 ? ratchet handle, stubby adjustable wrench, Needle nose pliers and dikes. Hex sockets, 5,6,8,10 mm. 3/8 in Sockets, 8,10,12,14,16,17,19,22 mm. ?> 3/8> ? in adaptors, 14mm and 27 mm crows feet. Helmet lock removal tool. 3/8 in and ? in extensions. Zip ties
Right Fairing pocket
Throttle lock adjustment allen set, Stubby screw stick set, Spare nuts and bolts, crimp terminals, small ratchet, valve stem tool
Right Pannier Tool bag
26 piece screw stick set, Spark plug caps and plugs, Jumper cables, feeler gage, crimp tool, Slime in a can, Dynaplug kit, Gummy repair kit, electric pump, electrical and duct tape. Spare wire. Zip ties. Metric Hex combo set. Spare cheepo Voltmeter
(To buy?.10 mm >12 mm offset closed end wrench)
NT tool locator.doc 8/13
Under the seat.
Plug and Go Kit, Volt meter, Metric Hex key set, Small Channel Locks, Wrench Set including 17,14,12,10,and 8 mm open/closed end wrenches
?Pass through? shaving kit
?? and 3/8? breaker bars, Stubby ?-3/8 ? ratchet handle, stubby adjustable wrench, Needle nose pliers and dikes. Hex sockets, 5,6,8,10 mm. 3/8 in Sockets, 8,10,12,14,16,17,19,22 mm. ?> 3/8> ? in adaptors, 14mm and 27 mm crows feet. Helmet lock removal tool. 3/8 in and ? in extensions. Zip ties
Right Fairing pocket
Throttle lock adjustment allen set, Stubby screw stick set, Spare nuts and bolts, crimp terminals, small ratchet, valve stem tool
Right Pannier Tool bag
26 piece screw stick set, Spark plug caps and plugs, Jumper cables, feeler gage, crimp tool, Slime in a can, Dynaplug kit, Gummy repair kit, electric pump, electrical and duct tape. Spare wire. Zip ties. Metric Hex combo set. Spare cheepo Voltmeter
(To buy?.10 mm >12 mm offset closed end wrench)