luggage

  1. Comanche

    [How To] Pannier Latch Solution

    Just like almost everybody else, I've had problems with the pannier latches. Here is the solution I came up with - and thus far, I am very happy. Full disclosure - I'm about as mechanically minded as can be - - NOT! I really am a klutz. While the idea was mine, the work was done by Big Phil...
  2. Mellow

    [Review] Dry Pak waterproof duffel (Large)

    I wanted something to use for the vstrom as the twisted throttle dry spec bag is just a little too wide and with a jacket and back armor it pushes too much against my back. So, I thought I'd try this link out that I've been saving for a couple years and see if the bag was any good. Enter the...
  3. Coyote Chris

    [How To] Installing SW-Motech rack

    (Please correct or delete pics if I vilotated any copyright laws) Prep. Read "Zen and the Art of Motorcycle Maintenance" to find out how SW-Motech came up with THEIR instructions.... 1. Read this thread...
  4. [How To] J&M CB Installation w/o a top trunk

    I completed the install (save for the portable music input as I'm waiting on a grommet) of the JMCB2003 unit on my wife's NT700V. Most of the installs I have seen are all with top trunks making the attachment of the antenna a bit more straight forward. My wife doesn't have a top trunk on the...
  5. Rich

    [How To] Making it easier to switch pannier lids between large and standar

    Several of us have decided it's worthwhile to sometimes have the stock panniers and other times have the larger lids. But there are several self-tapping screws that one does not want to be removing and reinserting into the plastic. Part of it is easy. Just get 4 extra striker plates and their...
  6. [How To] Admore LED lighting for GIVI Monokey E55 top case

    Hi folks, Please note: if you have slow internet, this may take a while to load. This is for informational purposes and to help with any ambiguity with this kit and for those contemplating on installing this kit. Documents attached for this installation include: Admores original installation...
  7. Mellow

    [How To] Powered Trunk Lighting w/Powerlet

    I know... you're saying to yourself "Why doesn't Mellow just go get another wing, enough with all the lights.... " But, trust me, you'll like this one... I can't say how much I really like the Stingerz LEDs from Custom Dynamics. I used them on the Mellow Lighting post and decided I could do...
  8. RedLdr1

    [Review] Bestem Saddlebag Liners

    I recently purchased a set of the Bestem Saddlebag Liners off ebay. The liners are well made, have a sewn on carry handle, detachable shoulder straps, have Deauville embroidered on the side, and best of all they expand to fit the optional Large Pannier Lids! :D The Seller I purchased them from...
  9. [How To] Built my own topcase carrier

    (from the other forum, where I posted this on 4/25/2010) I decided to build my own topcase rack, because I think I can do better than what I've seen ready-made. I purchased the following: 1. Aluminum flat stock from McMaster-Carr. 3/8" x 12" x 12". 3/8" thick is overkill but I wanted to be...
  10. [How To] Removing the fairing pocket

    (pulled from the other forum and rewritten because the links are all broken now) Before you can take out the pockets, you have to take off the black side panel (not getting into that here). Turn the bars so they're all the way forward on the side you're taking the pocket out of. Take out...
Top Bottom